Tips From the Moving Company Pros: The Best Ways To Move a Pinball Machine



With pinball making a huge revival throughout the country, Mild Giant wants to make certain that these classic, stunning machines remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

Initially look, pinball machines can appear daunting to move due to the fact that of their weight, fragility, and size. Thankfully, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs utilize this system, along with the early Solid State makers.

Later machines have hinges and utilize a locking system to keep the headbox upright. There may also be 2 bolts inside as added safety, in case the lock is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear access panel to acquire access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key might have been lost. On a regular basis, there is a screw keeping this panel in place.

As soon as within, remove the bolts and disconnect the big connectors that have electrical wiring decreasing into the maker. You may wish to identify these connectors to put them back in the best area, however they should be different sizes, making it tough to plug back improperly.

You can now remove the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in location.
Early Strong State Pinballs

For early Solid State Pinballs, you will have to eliminate the back glass. There is a lock located on the headbox in among 3 areas: the left-hand side at the top, right-hand side on top or on top of the headbox in the center.

When opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), then pull it out from the bottom.

Open up the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the machine. You may desire to identify these plugs to put them back in the ideal spot. You may not read more require to get rid of the plugs, as the circuitry should be long enough to enable the headbox to be folded down.

At this moment, you can secure the light panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, this contact form there is a turnable latch system situated at the back of the headbox. Utilizing the provided key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is a basic setup and needs no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in place.

If you can not fold the head box down, then you have to enter. There is a lock located at the top of the back glass in the. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to remove the display panel. You can do this by lifting it up and out. And finally, open the lamp panel. There will be a lock situated on either the left-hand or right-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it belongs to the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Machine legs are held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.

However these threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this is the case, you will have to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.

With the front door (coin door) open, move the lock down bar latch throughout and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by placing your hand where the ball drains, and lift the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have been eliminated, replace the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to fit.
Packing the Pinball.

You are now prepared to transfer your pinball device. Before you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball using a van or SUV, it may be much easier to get rid Bonuses of the legs simply prior to filling the maker. Get a pal to have and assist one of you supporting the pinball, while the other eliminates the front legs.

Ensure you strap the pinball in, as you do not want it moving if you have to stop all of a sudden!

For Electro-Mechanical pinball machines, you need to remove the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it may be simpler to remove the legs just prior to loading the maker. Get a good friend to have and assist one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *